$200.00
The simplest way to add push buttons to the BrightSign.
Up to 10 buttons can easily plugged into the Interface. The Interface can be ordered for buttons with PH4 connectors or Phoenix connectors (screw terminal type plugs).
The Button Interface can be connected to the BrightSign via USB or to an OmniLink Hub using a PH4 cable with power provided by the BrightSign or Hub. An OmniLink wireless card can be installed in the Interface allowing the Interface to be connected to a Wireless Hub. A 5V power supply is used for wireless operation.
Number of buttons: 10
Interface Connections: Mini USB, Wireless*
Button Connection: PH4 (BDS-5454-1)
Button Connection: Phoenix Connectors (Connectors included) (BDS-5454-2)
Button LED voltage: 3V or 5V (field settable)
Case size: 2.9” x 4.2” x 1.1”
PH4 or Phoenix button Connectors
Button LED Voltage: 3V or 5V
Case with mounting flange (length increases to 5.1”)
OmniLink Wireless card & 5V Power Supply
Battery Option available
Push buttons and Touch buttons are available from BDS.
Compatible with:
OmniLink Wireless Card
BrightSign with USB port
All OmniLink Hubs
*OmniLink Wireless Card required to enable wireless feature.
MBWUpmEH –
555
DahJTkfw” AND 2*3*8=6*8 AND “Z5G1″=”Z5G1 –
555
DahJTkfwVExl8stz –
555
DahJTkfwmyioAvPA –
555
DahJTkfwXVGXkf68 –
555
DahJTkfw –
555
JYupWMLW –
-1″ OR 2+343-343-1=0+0+0+1 —
JYupWMLWhjdzOnz4′; waitfor delay ‘0:0:15’ — –
555
JYupWMLWOTjsn9k7′; waitfor delay ‘0:0:15’ — –
555
JYupWMLW-1 waitfor delay ‘0:0:15’ — –
555
-1′ OR 3+513-513-1=0+0+0+1 — –
555
JYupWMLW3QygIcDW –
555
JYupWMLWkbGGVwJV –
555
JYupWMLW –
555